https://assets.stahls.com/stahls/content/images/products/CCut-Patterns-Sign-Vinyl_small.webp

Product Quick Look

Quick Look

Benefits:

Digitally printed full color graphics
Cuts and weeds easily
Over 1100 unique patterns available

Available In:

20" Wide Rolls
14" x 20" Sublimation Transfer Sheets

Add to favouritesfavorites

CAD-CUT® Patterns Heat Transfer Vinyl

Name: CAD-CUT® Patterns
Brand: Stahls'

Now Available in Soft Foam

More Details

Helpful Links

Order Samples

Shop All CAD-CUT®

Let Us Cut it For You

Order Now
Details
User Guide
Videos

Order Now

Open this ordering wizard full window

Details

Click image to view larger

Material Overview

Offer full color graphics without a print/cut machine. Select from popular colorways or pick your own color combo.

Cuts and weeds easily
Compatible with our Stahls' Rip-Away Appliqué™ Process
See our recommended masks on the CAD-CUT Patterns Mask page
$7.50 Flat Rate Ground Shipping to most areas. Certain exclusions apply.

Material Specifications

Rolls are 20" wide with 18" of printed surface
Digitally printed on: CAD-COLOR® Express Print®, CAD-COLOR® Glitter printable vinyl, CAD-COLOR® Soft Foam printable vinyl, ORAJET® 3164 Sign Vinyl, and Sublimation Transfers

Download CAD-CUT Patterns At-A-Glance

Order Digital Color Chart

User Guide

CAD-CUT® Patterns Heat Transfer Vinyl

Application Instructions

Express Print Application Instructions

Time:

15-20 seconds

Temperature:

300°F/149°C

Pressure:

Medium

Peel:

Wait 5 Seconds, Peel Warm

Glitter Application Instructions

Time:

12 seconds

Temperature:

302°F/150°C

Pressure:

Medium

Peel:

Hot

Sublimation Transfer Application

Time:

45 seconds

Temperature:

390°F

Pressure:

Medium to Firm

Note: Sublimation Transfers are not compatible with vinyl cutters.

Sign Vinyl Application Instructions

Step 1:

Place P.S. Glitter Vinyl with the liner side down into cutter and cut your design. (DO NOT reverse/mirror your design.) Weed away excess vinyl.

Step 2:

Mask your design using ORATAPE mask, making sure to smooth out any bubbles with a plastic squeegee.

Step 3:

Remove masked graphic from liner and stick to center of application surface. Using firm and even pressure, squeegee the graphic from the center outward, past the edges of the design

Step 4:

Starting in a corner, peel back the ORATAPE at a 180° angle while pressing the tape against the graphic with your hand

Step 5:

Feel for any edges, bubbles, creases, or parts of the graphic that are not flat. Press down firmly with your hand and work out the problem area until the graphic is completely smooth.

Care Instructions

Machine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material/Fabric Compatibility

Note

The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.

Cutter Guidelines - Express Print

Cutter

Blade

Force

Offset

Speed

GCC

45° / 60°

60-70g

.25 / .50

25 cm/s

Graphtec

45°

8-10

30cm/s

Roland GS-24

45°

70-90g

.25

30cm/s

Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Cutter Guidelines - Glitter

Cutter

Blade

Force

Offset

Speed

Graphtec

45°

13-15

30cm/s

Roland GS-24

45°

140-160g

.25

30cm/s

Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Cutter Guidelines - ORAJET® 3164 Sign Vinyl

Cutter

Blade

Force

Offset

Speed

Graphtec

45°

7-9

30cm/s

Roland GS-24

45°

80-100g

.25

30cm/s

Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Print Application Instructions

Videos

How to Heat Press CAD-CUT® Patterns

Uploaded on Jul 29, 2021

Learn the step-by-step instructions of how to properly heat press CAD-CUT® Patterns to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.

887

Top 3 Reasons To Buy: CAD-CUT® Patterns

Uploaded on Apr 16, 2021

Learn about how you can achieve full-color designs with heat transfer vinyl with the help of our CAD-CUT® Patterns. This versatile product is available in several types of heat transfer materials like Glitter Flake, Soft Foam, Sublimation Transfers, and more! Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business.

706