Click image to view larger
FlexStyle® by Stahls' Custom Emblems
Premium 3D Embellishment
Choose from the following emblem options:
- Beveled - Beveled edges for a sharp, refined look
- Domed - Shiny finish with 3D bubble effect
- Flat - Shiny 3D finish with a "flatter" appearance
- Textured - Detailed color and textures
Details
User Guide
Videos
Overview
Choose from the following emblem options:
- Beveled - Beveled edges for a sharp, refined look
- Domed - Shiny finish with 3D bubble effect
- Flat - Shiny 3D finish with a "flatter" appearance
- Textured - Detailed color and textures
Hotronix® 360 IQ™ Hat Press
Heated Upper Platen
Time:
15-20 seconds
Temperature:
360°F
Pressure:
Medium
Peel:
Cold
Cover Sheet:
Instructions:
Pre-heat bottom platen for 60 seconds and fabric for 15-20 seconds.
Heated Lower Platen
Time:
12-15 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Cold
Cover Sheet:
Cap Press
Time:
20-30 seconds
Temperature:
360°F
Pressure:
Medium
Peel:
Cold
Cover Sheet:
Instructions:
For first application, pre-heat the lower platen for 60 seconds. Load cap and pre-heat 20 seconds. Cover with Flex Pad and press.
Heat Application Note
If substituting the 1/8" Foam Pad for the FlexStyle® Silicone Pad, please add 5-10 seconds dwell time.
Care Instructions
Machine wash cold only; hang dry.
Material/Fabric Compatibility
Recommended for application to 100% Cotton, 100% Pre-Shrunk Cotton, 100% Polyester, Cotton/Polyester Blends.
For best results, Stahls' recommends applying with a heated lower platen.
For best results, Stahls' recommends applying with a heated lower platen.
Pressure Sensitive (Sticker) Application Instructions
- Make sure the application area is thoroughly cleaned. Rubbing alcohol can be used.
- Remove paper backing and press firmly on the desired location.
- For best results, please allow at least 24 hours cure time.
Additional Information for Hard Goods
For use on smooth, hard surfaces. Not recommended for surfaces that may contain an oil finish such as silicone or any type of outdoor goods.
Easily Create a Custom Hats Design with Emblem Patches and One Touch Caps
2020-06-26T12:38:20Z
When it comes to applying a custom design to hats like the One Touch Cap it's safe to say that it can be challenging, but rewarding when done properly. In this video Josh Ellsworth is going to walk you through how combining the Hotronix® 360 IQ Hat Heat Press and FlexStyle® custom emblems can make decorating hats like this one fast and easy for anyone! To pre-order your very own 360 Hat Heat Press simply visit us at https://bit.ly/3hYjq5t You can also order custom FlexStyle by STAHLS' emblems online by visiting https://bit.ly/2Yq31Pu Connect with us online: Facebook: https://www.facebook.com/stahlsheatprinting Twitter: @StahlsIDDirect https://twitter.com/StahlsIDDirect Instagram: Stahlsheatprinting https://www.instagram.com/stahlsheatprinting For more heat printing tips and tricks, connect with Stahls’ Blog at https://blog.stahls.com/ -~-~~-~~~-~~-~- Liked this video? Then please watch: "5 Cool Ways to Use Heat Transfer Foil & Adhesive" https://www.youtube.com/watch?v=8p1Ze7wQ5dY -~-~~-~~~-~~-~-