Quick Look
Benefits:
- Best for decorating fashion, cheer, and fan wear
- Glitter finish
- For light or dark-colored fabrics
Available In:
20" Wide Rolls
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Click image to view larger
Material Overview
This eco-solvent printable Glitter is ideal for decorating fashion, cheer, and fan wear. The glitter/shimmer finish provides a unique look that sells.
- Recommended mask: Magic Mask® High Tack
- Can be cut immediately
- For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
- Available in CAD-CUT® Patterns
- Compatible with our Stahls' Rip-Away Appliqué™ Process
- $7.50 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Material Specifications
- Thickness: 392 microns (.392 mm)
- Washability: 50
- Recommended drying time: 30 minutes before masking
- Safety: CPSIA Certified
Application Instructions
Time:
12 seconds
Temperature:
302°F/150°C
Pressure:
Medium
Peel:
Hot
Hotronix® 360 IQ™ Hat Press
Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:
Print/Cut Instructions
- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Material/Fabric Compatibility
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Note
The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Material Combination Instructions
Foreground material:
Background material:
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Roland VS-300i
45°
140-160g
.25
20cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
How to Heat Press: CAD-PRINTZ® Glitter
2021-08-18T14:00:29Z
Learn the step-by-step instructions of how to properly heat press CAD-PRINTZ® Glitter to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure. To order CAD-PRINTZ® Glitter today simply click the link here https://bit.ly/3i49eKM
Top 3 Reasons to Buy: CAD-PRINTZ® Glitter
2021-07-16T20:00:06Z
Learn about one of the best full color heat transfer materials on the market in CAD-PRINTZ® Glitter. This eye-catching heat transfer material offers you the ability to get vibrant colors in each design. It's also able to be heat applied to other colored garments without fear of dye migration. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-PRINTZ® Glitter today simply click the link here https://bit.ly/3kjYedO