Internet Explorer is no longer supported. We recommend upgrading to Chrome, Firefox, Safari, or Microsoft Edge browser.
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
https://assets.stahls.com/stahls/content/images/products/CCut-Patterns-Sign-Vinyl_small.webp
Product Quick Look
Quick Look

Benefits:

  • Digitally printed full color graphics
  • Cuts and weeds easily
  • Over 1100 unique patterns available

Available In:

20" Wide Rolls
14" x 20" Sublimation Transfer Sheets
CAD-CUT® Patterns Heat Transfer Vinyl

CAD-CUT® Patterns Heat Transfer Vinyl

Now Available in Soft Foam

Order Now

Open this ordering wizard full window

Details

Material Overview

Offer full color graphics without a print/cut machine. Select from popular colorways or pick your own color combo.

Material Specifications

User Guide

CAD-CUT® Patterns Heat Transfer Vinyl

Application Instructions

Express Print Application Instructions

Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm

Glitter Application Instructions

Time:
12 seconds
Temperature:
302°F/150°C
Pressure:
Medium
Peel:
Hot

Sublimation Transfer Application

Time:
45 seconds
Temperature:
390°F
Pressure:
Medium to Firm
Note: Sublimation Transfers are not compatible with vinyl cutters.

Sign Vinyl Application Instructions

Step 1:
Place P.S. Glitter Vinyl with the liner side down into cutter and cut your design. (DO NOT reverse/mirror your design.) Weed away excess vinyl.
Step 2:
Mask your design using ORATAPE mask, making sure to smooth out any bubbles with a plastic squeegee.
Step 3:
Remove masked graphic from liner and stick to center of application surface. Using firm and even pressure, squeegee the graphic from the center outward, past the edges of the design
Step 4:
Starting in a corner, peel back the ORATAPE at a 180° angle while pressing the tape against the graphic with your hand
Step 5:
Feel for any edges, bubbles, creases, or parts of the graphic that are not flat. Press down firmly with your hand and work out the problem area until the graphic is completely smooth.

Care Instructions

Machine wash inside-out using mild detergent. Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material/Fabric Compatibility

Cutter Guidelines - Express Print

Cutter
Blade
Force
Offset
Speed
GCC
45° / 60°
60-70g
.25 / .50
25 cm/s
Graphtec
45°
8-10
0
30cm/s
Roland GS-24
45°
70-90g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Cutter Guidelines - Glitter

Cutter
Blade
Force
Offset
Speed
Graphtec
45°
13-15
0
30cm/s
Roland GS-24
45°
140-160g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Cutter Guidelines - ORAJET® 3164 Sign Vinyl

Cutter
Blade
Force
Offset
Speed
Graphtec
45°
7-9
0
30cm/s
Roland GS-24
45°
80-100g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Videos

How to Heat Press CAD-CUT® Patterns

2021-07-29T12:00:26Z

Learn the step-by-step instructions of how to properly heat press CAD-CUT® Patterns to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure. To order CAD-CUT® Patterns today simply click the link here https://bit.ly/33Xr8Hg

Top 3 Reasons To Buy: CAD-CUT® Patterns

2021-04-16T17:15:00Z

Learn about how you can achieve full-color designs with heat transfer vinyl with the help of our CAD-CUT® Patterns. This versatile product is available in several types of heat transfer materials like Glitter Flake, Soft Foam, Sublimation Transfers, and more! Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-CUT® Patterns today simply click the link here https://bit.ly/2ReZ1QM