CAD-COLOR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl
Create a high gloss finish.
With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Non-Pressure Sensitive
- Thickness: 50 microns (.05 mm)
- Stretch & Rebound: 5
- Washability: 50
- Color Fastness: 4-5
- Dry Time: 30-60 minutes
- Safety:
Tip: Protect heat-sensitive garments from imprints and scorching with a Silicone Upper Platen Cover.
roll over image to zoom
Order Now
Overview
User Guide
CAD-COLOR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl
1-Color Application Instructions
Time:
Tack for 5 seconds, peel cold, cover and seal 5 seconds.
Temperature:
280-300°F/ 138-150°C
Pressure:
Medium (#6 on Hotronix)
Heated Lower Platen Application
Lower Platen:
320°F
Upper Platen:
250°F
Time:
12-15 seconds (depending on thickness of garment)
Pressure:
Medium
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
| Cutter | Blade | Force | Offset | Speed |
| Roland® GX-24 | 45° | 80-90g | .25 | 30cm/s |
| Roland® VP-300 | 45° | 80-90g | .25 | 30cm/s |
| Roland® SP-300 | 45° | 80-90g | .25 | 30cm/s |
| Roland® XC-540 | 45° | 80-90g | .25 | 30cm/s |
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Log in or register to start creating a list of Your Favorites
You already have 10 favorites.
Remove one to add this one.
Adding Favorite...
