Quick Look
Benefits:
- Effortless weeding
- Low temp application
- Matte-finish & soft feel
Available In:
15" Wide Rolls
CAD-CUT® UltraWeed™ Heat Transfer Vinyl
Achieve ultimate results with this easy-to-weed material
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Click image to view larger
Material Overview
UltraWeed™ is the go-to material you need for everyday heat printing projects. With smooth cutting on any vinyl cutter, effortless weeding, and low temp application, it’s guaranteed to give you the ultimate, worry-free application from start to finish.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: High-Tack, Clear
- Thickness: 90-100 microns (.09-.1mm)
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
CAD-CUT® UltraWeed™ Heat Transfer Vinyl
Application Instructions
Application–Heat Press
Time:
12 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Hot
Layering:
Press background color for 2-3 seconds, peel hot. Press foreground layer for 12 seconds, peel hot.
Note: If your garment scorches, turn down the heat press temperature to 280°F/138°C
Application–Home Iron
- Set iron dial between Cotton & Linen
- Place on flat, hard surface
- Cover design with cover sheet or other multi-purpose paper
- Press iron with medium pressure (do not slide iron)
- Press each section of design for 15-20 seconds
- If areas of design lift after application, replace cover sheet & re-press for 10 seconds
- Peel carrier cold
1-Color Application Instructions
Time:
12 seconds
Temperature:
260-300°F
Pressure:
Medium
Peel:
Hot
2-Color Application Instructions
Time:
Press background layer for 2-3 seconds, place foreground layer for full application of 12 seconds
Temperature:
260-300°F
Pressure:
Medium
Peel:
Hot
Hotronix® 360 IQ™ Hat Press
Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:
Special Notes
If the garment is 50% or more cotton it will require 280°F + degrees.
Craft Cutter Instructions
Cricut
Blade:
Standard
Setting:
Everyday Iron-On
Silhouette
Material Type:
Heat Transfer, Smooth
Blade:
Standard
Speed:
8
Force:
4
Brother
Blade:
2
Speed:
1
Pressure:
4
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
Material Combination Instructions
Foreground material:
Background material:
Cutter Instructions
Cutter
Blade
Force
Offset
Speed
Graphtec
45°
7-9
0
20cm/s
Roland GS-24
45°
60-90g
.25
20cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Top 3 Reasons To Buy: CAD-CUT® UltraWeed™
2021-04-16T17:15:01Z
Learn about ultimate heat transfer vinyl for any job on the market in CAD-CUT® UltraWeed™. This easy to weed heat transfer material offers you the ability to apply at a low temperature, easy weeding, and is smooth enough to be cut by any kind of vinyl cutter. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-CUT® UltraWeed™ today simply click the link here https://bit.ly/3wFZFXP