https://assets.stahls.com/stahls/content/images/products/CCut-SuprtFlmLite-Wolf_small.jpg

CAD-CUT® SportFilm Lite™ Heat Transfer Vinyl

Best value material available.

  • Great for lightweight active garments
  • Cuts & weeds easily
  • Thin, flexible, & durable
  • Semi-matte finish
  • Not recommended for layered 2-color application
  • Laser cutter compatible
  • $5 Flat Rate Ground Shipping to most areas Certain exclusions apply.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Thickness: 100 microns/.10mm
  • Stretch & Rebound: 3
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 15 seconds
Temperature: 320°F/160°C
Pressure: Medium
Peel: Warm

Sports Ball Heat Press Application Instructions

Time: 8 seconds
Temperature: 230°F/110°C
Pressure: Firm (top platen should make contact with the ball 2 inches before final lockdown)
Peel: Cool
Note: For textured balls, remove carrier and heat apply for an additional 8 seconds.

SportFilm Lite is not recommended for two-color application.

If you’re having issues with the film peeling up with the carrier when releasing, allow the design to cool a little longer. If you’ve already started to lift the edges, complete a repress.
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:
  

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
GCC 45°/60° 100 - 110g/50-60g0.22525 - 50 cm/s
Graphtec 45° 10035
Ioline 100 45°/60° 100-140g/120-140g .15 / .45 12:00
Ioline 300 30°/45° 100-120g .85 12:00
Roland GX-24 45°/60° 100-110g/50-60g .225 25 - 50 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Most Popular Videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...