Quick Look
Benefits:
- Best heat transfer vinyl for performance wear
- Applies at a low temp
- High stretch and rebound
Available In:
20" Wide Rolls
High Tack & Low Tack
High Tack & Low Tack
Order Now
Details
User Guide
Open this ordering wizard full window
Click image to view larger
Material Overview
With superior stretch and rebound, Premium Plus™ was designed to keep up with the most strenuous movements while retaining its original shape. This low-temp material is the ideal choice when decorating heat-sensitive performance wear, and once heat applied has an extremely soft and lightweight feel.
Also available in: Pre-Cut Letters and Numbers
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Pressure-Sensitive
- Low Tack Thickness: 80-108 microns/.080-108mm
- High Tack Thickness: 92 microns/.092mm
- Stretch & Rebound: 5
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
CAD-CUT® Premium Plus™ Heat Transfer Vinyl
Application Instructions
Low Tack Application Instructions
Time:
8-12 Seconds
Temperature:
280-300°F/138-149°C
Pressure:
Medium
Peel:
Warm or Cold
Two-Color
Tack background 2 seconds, peel warm, place foreground on top, 8 seconds
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
High Tack Application Instructions
Time:
8-12 Seconds
Temp:
280-300°F/138-149°C
Pressure:
Medium
Peel:
Hot
Two-Color
5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.
Heated Lower Platen Application - 100% Polyester
Lower Platen:
320°F
Upper Platen:
270°F
Time:
10 seconds (depending on thickness of garment)
Pressure:
60 psi (#6/Medium on Hotronix machines)
Peel:
Warm for Low Tack; Hot for High Tack
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen:
290°F
Upper Platen:
270°F
Time:
30 secs
Pressure:
60 psi (#6/Medium on Hotronix®)