https://assets.stahls.com/stahls/content/images/products/CCut-Metallic-Heat-Transfer-Vinyl-Hustle-Hard_small.jpg

CAD-CUT® Metallic Heat Transfer Vinyl

Foil-like finish with a soft feel.

Add a higher-perceived value to designs with Metallic Vinyl. This 1-step application gives the look of Foil with an incredibly soft feel.
  • Easy to cut and weed
  • Thin and stretchable
  • Holds fine detail
  • Low-temp application
  • Laser cutter compatible
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.

In Stock While Supplies Last

Important: Once handled or laundered, the material takes on a brushed metallic finish.

Material Specifications

  • Composition: Polyurethane
  • Carrier: Pressure-Sensitive
  • Thickness: 63 microns (.063 mm)
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 8-10 seconds
Temperature: 285°F/140°C
Pressure: Medium
Peel: Cold

Care Instructions
Machine wash cold, inside-out, using mild detergent on delicate setting.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:
  

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland 45° 90g.3535 cm/s
Graphtec 45° 93030
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...