CAD-CUT® GORILLA GRIP® II Heat Transfer Vinyl

Best choice to heat print on nylons.

Ideal for decorating equipment bags and jackets, GORILLA GRIP vinyl adheres to difficult fabrics such as tightly woven nylons, oxfords, satin, crinkle, and rip stop nylon.
  • Semi-matte finish
  • Hot Pink GORILLA GRIP II should not be used on cotton garments
  • Available in 11 colors, including Vegas Gold
  • Laser cutter compatible
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
15" Rolls in limited quantities available up to 45% off. Clearance pricing shown. All clearance items are final sale and cannot be returned.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure-Sensitive
  • Thickness: 80 microns (.08 mm)
  • Stretch & Rebound: 3
  • Washability: 50
  • Safety: CPSIA Certified
Quick Ship Item
Order Now

Open this ordering wizard full window

User Guide

CAD-CUT® GORILLA GRIP® II Heat Transfer Vinyl

1-Color Application Instructions

Time: Tack 2 seconds, peel cold, cover and seal 10 secs
Temperature: 320°F/160°C
Pressure: Light
Peel: Cold

2-Color Application Instructions

Background: Apply for 2 seconds, peel cold
Foreground: Apply for 2 seconds, peel cold
Final Application: Cover with Kraft paper, apply for 10 seconds
Temperature: 320°F/160°C
Pressure: Light

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:

Cutter Guidelines

Cutter Blade Force Offset Speed
GCC 45°/60° 80-100g / 100-150g.30 / .2525 - 50 cm/s
Graphtec 45° 10035
Ioline 100 45° 150g.1512:30
Ioline 300 30° 100g.1512:15
Roland GX-24 45°/60° 80-100g / 100-150g .30 / .25 25 - 50 cm/s
Before cutting, remove pink liner from the adhesive side of the material.
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...