https://assets.stahls.com/stahls/content/images/products/Fashion-FILM-heat-transfer-vinyl-cheer_small.jpg

CAD-CUT® Fashion-FILM® Heat Transfer Vinyl

The best material for T-shirts.

Ideal for application onto lightweight cotton, Fashion-FILM vinyl's thin composition and soft hand make it great for personalizing fashion apparel. Available in a wide variety of colors, including Fashion-FILM® Electric colors.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Clear, Pressure-Sensitive
  • Thickness: 88 microns/.088mm (95 microns for Electric colors)
  • Stretch & Rebound: 3.5
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 15 seconds
Temperature: 320°F/160°C
Pressure: Medium
Peel: Hot

2-Color Application Instructions

Time: Tack background 2 seconds, peel hot, place foreground on top, 15 seconds
Temperature: 320°F/160°C
Pressure: Medium
Peel: Hot

Heated Lower Platen on 100% Polyester

Lower Platen: 320°F
Upper Platen: 270°F
Time: 10 seconds
Pressure: 60 psi (#6/Medium on Hotronix® machines)
Peel: Hot
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen = 290°
Upper Platen = 270°
Time = 30 secs
Pressure = 60 psi (#6/Medium on Hotronix®)
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:
  

Cutter Guidelines

Cutter Blade Force Offset Speed
GCC 45°/60° 80g - 90g0.2525 - 50 cm/s
Graphtec 45° 10135
Ioline 100 45° 90g .15 12:15
Ioline 300 30° 100g .15 12:15
Roland GX-24 45° 80g - 90g.25 25 - 50 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...