CAD-CUT® Chroma Bling Heat Transfer Vinyl

Unique iridescent vinyl.

Create eye-catching designs with this special effect vinyl that changes color based on lighting and the garment to which it's applied. It combines a shiny metallic finish with iridescence and a hint of sparkle to create a truly unique visual effect.
  • Color shifts depending on lighting and viewing angle
  • Material is semi-transparent, allowing it to take on color properties of the fabric
  • Safe for children's clothing
  • Laser cutter compatible
  • Not recommended for multi-layer applications
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane
  • Carrier: Pressure-Sensitive
  • Thickness: 150 microns (.15 mm)
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 10 seconds
Temperature: 300°F/150°C
Pressure: Medium (60 psi)
Peel: Warm

Care Instructions
Machine wash warm.
Do not use bleach. Tumble dry, low heat on household machines. Cool iron, no steam. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland GS-24 45° 120g.3525 cm/s
Graphtec 45° 143030 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Customer Reviews

Average Customer Rating
(based on 2 reviews)
 Awesome fun product!
Reviewed by Kim Linebarger 8/20/2019 5:14:40 PM
Owns a Stahl's Hotronix Heat Press

Love this new addition to the heat transfer adds just the right touch of unique flashiness to our projects.  Cut at the same settings you would glitter or flock and follow the application instructions and you'll be great!

Reviewed by Penny 8/18/2019 10:08:58 AM
Owns a Hotronix Heat Press

Really wanted to love this but... New 45 blade cut at the recommended 120 force, proved not to be enough force to cut through. Next test - Upped the force to 140. Barely made cuts. Had to slide my fingernail around to hold down pattern while pulling excess. When it did separate it tore off the back side (adhesive) from the front of the design in jagged edges. 3rd test - upped to 160 force. Little better cut still had to use fingernail to guide and it still ripped up adhesive from the front.

Review this product.

* Required Fields

Most Popular Videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...