Quick Look
Benefits:
- No-sew application
- Ideal for large jobs
- Laser cutter compatible
Available In:
16.25" Wide Rolls
Order Now
Details
User Guide
Open this ordering wizard full window
Material Overview
Our 100% polyester tackle twill heat transfer material is ideal for large jobs that require the look of appliqué without the sewing. Unless the material is cut with a laser, it will need to be sewn to prevent fraying.
Use Magic Mask® High Tack as a carrier to stabilize the material when cutting with a vinyl cutter.
- Features a permanent adhesive
- Must be sewn to prevent fraying (unless cut with a laser)
- Perma-TWILL is also available in 51" rolls
Perma-TWILL® Tackle Twill Heat Transfer Vinyl
Application Instructions
1-Color Application Instructions
Time:
20 seconds
Temperature:
350°F/177°C
Pressure:
Firm
Peel:
Hot
2-Color Application Instructions
Background:
Apply for 10 seconds
Peel:
Warm
Foreground:
Apply for 30 seconds
Peel:
Hot
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
Note
The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Material Combination Instructions
Foreground material:
Background material:
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
GCC
Twill Blade
150g
0.225
25-50cm/s
Graphtec
45°
13-16
0
30cm/s
Ioline 300
45°
300g
.94
50cm/s
Roland GS-24
Twill
140-160g
0.5
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.