CAD-CUT® Fashion-REFLECT™ Heat Transfer Vinyl

Add flair to fashion apparel.

Note: Silver Fashion-REFLECT™ is the only color in this line that meets the reflectivity requirements of the ANSI/ISEA or that of any other national/international safety regulations
Fashion-REFLECT is being discontinued. Limited quantities available up to 50% off. Discount pricing shown. All sales are final and cannot be returned.

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure-Sensitive
  • Thickness: 160 microns (.16 mm)
  • Stretch & Rebound: 2
  • Washability: 50
  • Safety:CPSIA Certified
Order Now

Open this ordering wizard full window

User Guide

CAD-CUT® Fashion-REFLECT™ Heat Transfer Vinyl

1-Color Application Instructions

Time: Tack for 5 seconds, peel warm and cover and seal 5 seconds.
Temperature: 305°F/152°C
Pressure: Medium
Peel: Warm

2-Color Application Instructions

Background: Apply background for 5 seconds; peel warm
Foreground: Apply foreground for 5 seconds; peel warm
Final Application: Cover with Kraft paper and reseal for 5 seconds
Temperature: 305°F/152°C
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
GCC 45°/60° 80g / 90g.60 / .2525 - 50 cm/s
Graphtec 45° 12121
Ioline 100 45° 140g .15 12:45
Ioline 300 30° 120g .15 12:15
Roland GX-24 45° / 60° 80g / 90g.60 / .2525 - 50 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...