Vinyl Cutter Blades

Blades for Roland®, Graphtec and GCC Cutters

We carry replacement blades for Roland, Graphtec, GCC, and other industry vinyl cutters.

Choose from 45° blades for all purpose cutting and 60° blades for thicker materials, flock, and twill.

Roland blades are compatible with all GCC vinyl cutting plotters.

Don't forget your blade holder!

Please wait... Adding to Cart

Questions & Answers

Everyone has questions. Tell us yours.

Q:
I have the Ioline 300 and have always used the 45 degree blade. I only cut twill and felt. Above in the drop down, it says 60 degree blade for twill and felt cutting. The 60 degree is Ioline 100 does that also fit the 300?
A:
The 60 degree blade for the Ioline 100 vinyl cutter requires a different (thinner) blade holder than the one for the Ioline 300.
Q:
How long do cutting blades last?
A:
There is no hard and fast rule for this. The length of time that a blade lasts will depend on a variety of factors including how much cutting you are doing and what you are cutting. For example, reflective materials have glass beads in them and wear down blades much faster than do heat transfer materials, for example. The rule of thumb is to perform and evaluate test cuts at regular intervals. If you are working with a material that isn’t cutting the way it used to, check your blade first.
Q:
Why are designs not cutting smoothly and leaving ragged edges?
A:
First, check that your blade does not need to be replaced, then verify that you are using the proper cutting guidelines for the material you are cutting. If this doesn't solve the problem, it could be the amount of nodes in the design. To reduce the number of nodes in a design you will need to use your graphics program's node edit tool.

Ask a question

Leave us a question and we'll post the answer shortly. If you need an immediate response, please use live chat.

1. Contact Information:

Name
Company
Email

2. Question Category:

3. Enter Question:

SUBMIT >RESET
Want to learn more?
Visit our Blog.
GO >

Educational videos

Tip Jar - Selecting a Blade for your Vinyl Cutter 3:57

(Published on http://www.stahlsblog.com ) CAD-CUTdirect Tip Jar is a weekly series that gives decorators tips and tricks on using their vinyl cutting equipment. This Tip Jar teaches how to select a blade for your vinyl cutter. Whether you are using a Roland®, Mimaki, GCC, Creation, Graphtec or another style of plotter this video will be useful.

Review this product.

1. Contact Information:

Name
Company
Email

2. Rate this item:

3. Title for your review:

4. Write your review:

SUBMIT >RESET