800.4.STAHLS (800.478.2457)

Today: 8:00 AM-7:00 PM EST

CAD-CUT® 3M™ Scotchlite™ 5807 Heat Transfer Material

Apparel decoration for emergency worker, jogger, and biker safety.

3M™ Scotchlite™ Reflective 5807 brightly reflects vehicle headlights. Perfect for high-visibility apparel needs.
  • Waterproof, highly reflective finish
  • Meets retroreflective performance standards such as ANSI/ISEA 107, CSA Z96, and EN 471
  • Recommended fabrics: cotton, polyester, Lycra®/spandex, nylon
  • Order online and save 2%, discount is applied automatically
Please wait... Adding to Cart

3M Scotchlite 5807

Application At A Glance
  • Time
    10-20 Seconds
  • Temperature
  • Pressure
  • Peel

Care Instructions

Turn garment inside out. Wash on gentle cycle, cold water, mild detergent. No bleach, no whiteners. Dry in household dryer on low to medium setting. To prolong life of reflectivity, hand washing and line drying is recommended.

Cutting Notes

Always test cut prior to any production run. Cutter settings will need to be adjusted as the blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.

Cutter Guidelines

Cutter Blade Force Offset Speed
GCC 45°/60° 80g / 100-140g.25 / .47515 - 35 cm/s
Graphtec 45° 12150
Ioline 100 45° 220g .15 12:00
Ioline 300 45° / 60° 370g / 380g.15 12:00
Roland GX-24 45° / 60° 80g / 100-140g.25 / .47515 - 35 cm/s

Multi-Color Designs

CAD-CUT 3M Reflective 5807 can be used as a foreground to other heat transfer materials.

Please Note:

Due to the combination of fabrics, weaves, coatings, and dyes used in the textile industry, Stahls’ recommends and provides heat transfer material samples for testing.

3M Scotchlite 5807

The first lab-certified heat transfer material in the industry.

Stahls' is the first company in the imprinted sportswear industry to have a rigorous lab certification process. This ensures the highest quality materials to meet the needs of all of your real-world applications. Depending on the material, we run tests based on these parameters: safety, durability, and performance. The materials are rated on a scale from 1 to 5, 5 being the highest rating.

Lab Certified


This material is made of 145 micron Polyurethane (PU).


  • Stretchability Rating 3
  • Washability Rating 50
  • ANSI Safety Rating


Store in a cool, dry area. For best results, keep material away from direct sunlight, heat, and humidity.

Questions & Answers

Everyone has questions. Tell us yours.

Why is it necessary to pre-heat a garment before heat applying?
Pre-heating your garment removes the chemicals and moisture that may be in the garment due to manufacturing. Also, pre-heating assures a wrinkle free surface for heat application.
My cutter won’t cut after the job was sent from my computer. What could be the problem?
Check to see that your cables are securely connected from the computer to the cutter. If that doesn't work, consult your owner's manual.
Why is a cover sheet necessary?
A cover sheet not only protects your garment, it also protects your upper platen from stains, inks, adhesives, and scratches.
Can I use a household iron to apply Stahls' products?
We do not recommend applying any of Stahls' products with a household hand iron. We suggest using a heat press with adjustable pressure settings.
What caused my material to bunch while cutting?
On a vinyl cutter, be sure the pinch rollers are locked down, securing the edges of your material to allow for continuous feed.
Why are designs not cutting smoothly and leaving ragged edges?
First, check that your blade does not need to be replaced, then verify that you are using the proper cutting guidelines for the material you are cutting. If this doesn't solve the problem, it could be the amount of nodes in the design. To reduce the number of nodes in a design you will need to use your graphics program's node edit tool.
How do I know if my order is shipping from Michigan or Arizona?
The shipping location is indicated in your cart under U.O.M. It will be highligted in red SCS stands for Michigan and GSW stands for Arizona.
I order materials by the yard, but the rolls are too long for my GX-24. Did I do something wrong?
You should be using CAD-CUT® heat transfer material with your vinyl cutter. These materials have a clear carrier and the widths are compatible with the GX-24.

Materials By the Yard are rolls that must be hand cut or used with a flatbed cutter. This material does not have a carrier backing and is typically too long for a vinyl cutter.

Ask a question

Leave us a question and we'll post the answer shortly. If you need an immediate response, please use live chat.

1. Contact Information:


2. Question Category:

3. Enter Question:

Want to learn more?
Visit our Blog.
GO >

Review this product.

1. Contact Information:


2. Rate this item:

3. Title for your review:

4. Write your review:


Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...