Quick Look
Benefits:
- Inhibits dye migration
- Lightweight and soft
- Excellent stretch and rebound
Available In:
20" or 40" Wide Rolls
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Click image to view larger
Material Overview
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Non-Pressure Sensitive
- Thickness: 120 microns (.12 mm)
- Stretch & Rebound: 4
- Washability: 50
- Color Fastness: 4-5
- Dry Time: 30-60 minutes
- We recommend COLD wash only
- Safety: CPSIA Certified
CAD-COLOR® SuperTEK® Sublistop™ Printable Heat Transfer Vinyl
Application Instructions
1-Color Application Instructions
Time:
Tack for 5 seconds, peel warm, cover and seal 5 seconds.
Temperature:
280-300°F/ 138-150°C
Pressure:
Medium (#6 on Hotronix)
Heated Lower Platen Application
Upper:
250°F
Lower:
320°F
Time:
12-15 seconds (depending on thickness of garment)
Pressure:
Medium
Print/Cut Instructions
- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Material/Fabric Compatibility
Care Instructions
We recommend COLD wash only for this product.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Roland GX-24
45°
80-100g
.25
30cm/s
Roland VP-300
45°
80-100g
.25
30cm/s
Roland SP-300
45°
80-100g
.25
30cm/s
Roland XC-540
45°
80-100g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Buying Guide: CAD-COLOR® SuperTEK™ Sublistop™
2016-03-01T19:43:25Z
When it comes to printing performance wear, you need a material that will stick, stretch, and perform, the applies at a low temperature and inhibits dye migration through polyester garments. In this video, Stahls' TV educator Courtney Kubitza will teach you how to print, cut, weed, mask, and apply the CAD-COLOR® SuperTEK™ Sublistop™ printable heat transfer vinyl. For more heat printing tips and tricks, connect with Stahls’ Blog at https://blog.stahls.com/ -~-~~-~~~-~~-~- Liked this video? Then please watch: "5 Cool Ways to Use Heat Transfer Foil & Adhesive" https://www.youtube.com/watch?v=8p1Ze7wQ5dY -~-~~-~~~-~~-~-