Quick Look
Benefits:
- Create vibrant transfers with a semi-matte finish
- Thin and stretchable with a soft hand
- Applies at a low temperature
Available In:
20" or 30" Wide Rolls

CAD-COLOR® Soft Opaque II Printable Heat Transfer Vinyl
New & Improved Printable Material
Helpful Links
Order Now
Details
User Guide
Open this ordering wizard full window

Click image to view larger



Material Overview
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: High-tack, Clear
- Thickness: 80 microns (.080 mm)
- Stretch & Rebound: 5
- Washability: 50
- Color Fastness: 5
- Dry Time: 30 minutes
- Safety: CPSIA Certified
Application Instructions
Time:
5-7 seconds
Temperature:
250°F/121°C
Pressure:
Medium
Peel:
Hot
Print/Cut Instructions
- Print and cut your design in positive form on the media side of the material
- Once dry, weed away excess material
- Mask the weeded design, smoothing out any air bubbles
- Lift the mask to expose the vinyl adhesive from the backing
- Position the masked design on the garment for heat application
Material/Fabric Compatibility
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Roland VS-300I
45°
50g
.25
20cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.