CAD-COLOR® SuperTEK® Opaque Printable Heat Transfer Material

Stunning full color designs on light or dark fabrics.

  • Lightweight, stretchable
  • Excellent opacity
  • Semi-matte finish
  • Incredibly soft hand
  • Applies to almost any fabric, including Lycra®/spandex and nylon with the STiX2™ adhesive
  • Low application temperature won't damage performance garments
  • Recommended mask: Solutions® Mask
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 100 microns (.10 mm)
  • Stretch & Rebound: 4
  • Washability: 50
  • Color Fastness: 4-5
  • Dry Time: 30-60 minutes
  • Safety:CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: Tack for 5 seconds, peel warm and cover and seal 5 seconds.
Temperature: 280-300°F/ 138-150°C
Pressure: Medium (#6 on Hotronix)
Peel: Warm

Sports Ball Heat Press Application Instructions

Time: 8 seconds
Temperature: 230°F/110°C
Pressure: Firm (top platen should make contact with the ball 2 inches before final lockdown)
Peel: Cool
Note: For textured balls, remove carrier and heat apply for an additional 8 seconds.

Heated Lower Platen Application

Lower Platen: 320°F
Upper Platen: 250°F
Time: 12-15 seconds (depending on thickness of garment)
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.


Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland® GX-24 45° 80-90g.25 30cm/s
Roland® VP-300 45° 80-90g .25 30cm/s
Roland® SP-300 45° 80-90g .25 30cm/s
Roland® XC-540 45° 80-90g .25 30cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Customer Reviews

Average Customer Rating
(based on 8 reviews)
 impossible to weed
Reviewed by brad 7/24/2019 1:03:28 AM
Owns a stahls fusion Heat Press

I find this is great when you put it on the garment feels soft to the touch nice stretch and rebound, but if you have any large jobs the weeding will get to you. Specially if there is any text that you have to weed. I have tried my roland VS540i cutter from 80g - 150g same result every time the cuts just come up unless you pull apart or use the weeding tool to hold cut down as you pull away. I wont be purchasing this again

 great picture terrible weeding
Reviewed by Jessica 12/30/2017 6:23:21 PM

I love this except for weeding and if I do a full logo it feels kind of thick, other then that it stays on and has a higher life expectancy then it says I wash my shirts a lot and you cant tell it does make the logo feel more pliable after a few washes.

 Hard to weed
Reviewed by Louis 11/20/2017 2:24:48 PM

colors are great using trueviz inks but pain in butt to weed

 Long lasting, brilliant color!
Reviewed by Pablo Pichardo 4/2/2017 10:19:52 AM

This material still looks great after 1 year of use and washes. We mostly design shirts and uniforms for martial arts schools and the students shirts still look like new. White of the material stays brilliant and doesn't absorbs the color of the garment and is amazingly thin and feels light weight on the material that its pressed on. Just wish it was a little easer to work with as far as weeding when the type ir graphics are too thin or small. That makes have to rethink how much detail is in your designs sometimes. Other than that, I love this stuff!!

 Very good experience
Reviewed by Paul Quintanilla 9/27/2016 8:24:39 AM

We have been using it for about 4 years now, and have pretty good results. I just wish it would be 100% matte and maybe thiner

 Not sticking
Reviewed by David 9/8/2016 4:01:35 PM

I've tried the recommended settings. Increased decreased... I can not get this to stick to a pair of 95% cotton leggings.

Reviewed by Ron 7/24/2016 12:32:41 PM

Weeding 1/2inch fonts is not happpening . The lettering in the artwork started to curl up . Its going take me forever to weed this job.

 the best product easy to work
Reviewed by Lucie Davis 3/29/2016 10:10:31 AM

these is the best product I ever work with .

Review this product.

* Required Fields

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...