Letter Remover Solvent

GOOD

This product is very useable

I have used this remover for vinyl letters that are months old and it worked! Highly recommend it

works well

remover the best

I have been using this solvent for over 20yrs. I believe the problem is the way that people are using it. I put it in a small squeeze bottle then I can squeeze a small amount onto the back of the letter I want removed. then you stretch the shirt. the letter will pop off! Easy Peasy!!

Use a small applicator swab and dip into can. ALWAYS put cap o tightly between use, it evaporates fast when open. Will NOT evaporate if cap is on tight! Use wet swab onto the inside of shirt or back of vinyl. Let it wrinkle and pull off. When all lettering is off use scrap material & wet with solvent, rub vigorously to remaining glue to loosen and remove. This is not meant to save everything, if you have another shirt just make another, but when you have no more or it's a customers product or expensive then this will save your butt.

Very costly

Very costly

Very costly

Very costly

Very costly

Its ok could be better with an applicator to apply it with.

still leaves glue residue

Works just as advertised, we are very thankful for it, parents are happy they dont have to buy new uniform because of this product, they can just change number

GOOD PRODUCT.

I put a wrong name on one jersey, which was provided by my customer. Stahl's chat person told me about this product. And it worked. I was saved. Thank you

Works well

One of the best kept secrets in the industry... I never knew this stuff was around.. found it by accident... what a money saver on most garments... and vinyl products.. if you follow the instructions you have great success with it.. Thanks to my sales rep Patrick... what a guy......

My Customers cannotbelieve that I can remove numbers and replce with a different one and there isn't any residue. I use this product rarely and then will use two cans in a season, but have never had evaporationproblems! Just like nail polish remover it does need to be covered. I reccomend using this rather than replacing a hockey jersey, a t-shrt? well...that may be doable. I would use the product. myself..

ive used this for over 25 yrs. its the best to remove most anything. its vapor is heavy. you must seal any lid with another form of gasket with the lid. always turn the garment inside out and dab or soak the letter,number anything. do not use exhaust or it frosts up. only use exhaust for pin holes. this is the best for removing any letters or numbers!!

It says NOT to place this in another container....but basically you have to if you dont want it gone in a week,. $17.50 is a lot of money to spend on a tiny mistake. Its almost worth redoing a shirt instead. Telling us to place a rag in it?? NOPE..that wont work and makes it more of a hazard.

GREAT works perfectly. BUT don't remove the aluminum cap, poke a small hole, tightly close cap, and store in a cabinet (bathroom sink). This Product EVAPORATES very very fast.

This product works great for fixing mistakes. You need to be careful of the kinds of material you use it on, it will fade or stain some. I'm not real thrilled with how potent of a chemical it is, and it will eat through most rubber gloves. Use sparingly in a well ventilated area. Keep the solvent stored in original container closed properly and it will last. I'd give this product 5* if it didn't have a giant danger warning on it. :-)

This product works great for fixing mistakes. You need to be careful of the kinds of material you use it on, it will fade or stain some. I'm not real thrilled with how potent of a chemical it is, and it will eat through most rubber gloves. Use sparingly in a well ventilated area. Keep the solvent stored in original container closed properly and it will last. I'd give this product 5* if it didn't have a giant danger warning on it. :-)

Works awsome to remove letters, PROBLEM is it will evaporate right from the can, Even if the lid is on extra tight. STAHLS will do nothing about this, the customer service guy said yeah sometimes we recomend you put a rag in the lid to help stop this, They evidently KNOW there is a problem, Why dont they tell you that BEFORE it is all Gone?? I Will say the product works Excellent but what good is that, if it is gone beofre you can use it?? dont waste your money until they have better packaging, AL