https://assets.stahls.com/stahls/content/images/products/CCut-PrmPlus-Jefferson_small.jpg

CAD-CUT® Premium Plus™ Heat Transfer Vinyl

Original colors available while supplies last.

  • Applies at a low temp to prevent scorching on heat-sensitive items
  • High stretch & rebound
  • Silky matte finish
  • Available in a variety of colors, including popular university shades
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Current colors of Premium Plus are being discontinued. Remaining original are available while supplies last. These colors are not discounted at this time.

A wide range of new colors is available in New high-tack or low-tack Premium Plus.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Thickness: 80-108 microns/.080-108mm
  • Stretch & Rebound: 5
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 8-12 Seconds
Temperature: 280-330°F/138-166°C
Pressure: Medium
Peel: Warm or Cold
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

2-Color Application Instructions

Time: Tack background 2 seconds, peel warm, place foreground on top, 8 seconds
Temp: 280-330°F/138-166°C
Pressure: Medium
Peel: Warm
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

Heated Lower Platen

Lower Platen: 320°F
Upper Platen: 250°F
Time: 12-15 seconds (depending on thickness of garment)
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:
  

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
GCC 45°/60° 60 - 70g.25 / .5025 cm/s
Graphtec 45° 11135
Roland GX-24 Prem. Carbide 45° 60-70g.2525 cm/s
Roland GX-24 Prem. Carbide 60° 60-70g.5025 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Review

Customer Reviews

Average Customer Rating
(based on 4 reviews)
  Amazing products
Reviewed by Dwayne Pippin 7/16/2019 12:14:49 AM
Owns a Fusion ( Not I-Q ) Heat Press

I have been using Premium plus for awhile now and its just amazing. I have no issues with it at all. Its my goto . If you have your temp and pressure correct you will have no issues. Those who have issues do not have their Press setup properly ,especially if you dont know your pressure like a Hotronix fusion tells you . With a press not giving you pressure you are only guessing on pressure .

Stahls' Response to: Amazing products
7/16/2019 7:32:57 AM

Thanks for the great feedback Dwayne!


 Love this product!
Reviewed by Joel 5/5/2019 8:13:02 AM
Owns a stahls Heat Press

The Finnish feel is so nice! :) and weeding was a walk in the park! 5 star product


 Great Vinyl
Reviewed by Arber Como 3/10/2019 10:53:16 PM
Owns a My Iron Heat Press

This thing peels and apply's great. I apply with my iron for 30sec and this thing feels great afterwards, very light and soft/ smooth. Would recomend


 Worst Vinyl ever
Reviewed by Darlene 2/11/2019 12:10:23 AM

Do not waste your money on this! The worst vinyl I have ever seen or used in my life! No matter what temp I heat pressed on it wouldn't stick! It wouldn't peel hot or cold either. Wasted a lot of time, money, and product because of this :(


Review this product.

* Required Fields
Overview

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...