Quick Look
Benefits:
- Best adhesive for foil embellishments
- For use with vinyl cutter
- Handles fine details on intricate designs
Available In:
11.8" or 20" Wide Rolls
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Material Overview
Heat transfer foils are known for being short-term embellishments when added to transfer papers and plastisol inks. This heat transfer foil adhesive solves that problem, permanently binding the foil, giving foil-embellished designs a long life. Laser cutter compatible.
Use with Stahls' Heat Transfer Foil to create eye-catching designs.
Create a design from our library of CAD-CUT® Templates, clipart, and fonts - we'll cut it for you! Available in a variety of CAD-CUT materials, including Adhesive.
Material Specifications
- Easy, inexpensive way to create high-end fashion wear
- No need to screen print a base layer for foil - just cut, apply, and foil
- Arrives on a carrier for use with your vinyl cutter
- Handles fine detail for intricate foil embellishments
- Available in 20" and 11.8" (the same width as most heat transfer foils) rolls
- Safety: CPSIA Compliant
- Laser cutter compatible
CAD-CUT® Adhesive
Application Instructions
Adhesive Application
Time:
3-5 seconds
Temperature:
300°F/149°C
Pressure:
Light (20 psi)
Peel:
Hot
Foil Application
Time:
8-10 seconds
Temperature:
300°F/149°C
Pressure:
Firm (60-70 psi)
Peel:
Cold
Print/Cut Instructions
- Cut design from CAD-CUT® Adhesive, with adhesive side facing up
- Weed away excess material and follow Adhesive application instructions
- With colored side facing up, lay a slightly larger piece of Foil over applied design
- Use a cover sheet and follow Foil application instructions
- Once peeled, Foil adheres to the Adhesive only
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
Note
The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
Roland GS-24
45°
60-80g
.25
20cm/s
Graphtec
45°
7-9
0
20cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
How to Heat Press: CAD-CUT® Adhesive & Foil
2021-07-29T20:00:06Z
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Adhesive and Heat Transfer Foil to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure. To order CAD-CUT® Adhesive today simply click the link here https://bit.ly/33UJ9Gi Also, you can order any color of Heat Transfer Foil online as well by shopping here https://bit.ly/3otsjHX
Top 3 Reasons to Buy: CAD-CUT® Adhesive with Heat Transfer Foil
2021-04-16T17:15:00Z
Learn about one of the best heat transfer combos on the market in CAD-CUT® Adhesive vinyl and Heat Transfer Foil. These two products work great together and make it very easy to add a special effect look on to your garments. Watch as Josh highlights the top 3 reasons why you should consider these products and how they can best be used for your business. To order CAD-CUT® Adhesive today simply click the link here https://bit.ly/39YEir1 Also, you can order any color of Heat Transfer Foil online as well by shopping here https://bit.ly/3uBFEzH