Hotronix® 6" x 6" Heat Press

Innovative features for smaller transfers.

The portable 6" x 6" heat press has a patented state-of-the-art Auto Open feature.

This space-saving design is ideal for printing smaller graphics such as labels and left chest logos on shirts and jackets.

Compact design makes travel easy.

$825.00

Qty:
Add To Cart >
Please wait... Adding to Cart

Technical Specifications

Features

  • Patented Magnetic Auto Open Feature.
  • Digital time, temperature, and pressure controls.
  • 3/4" thick non-stick coated upper platen.
  • Patented Magnetic Assist Lock Down.
  • 3/8" Silicone pad.
  • Platinum RTD heat sensor.
  • Wide opening for easy layout.
  • Cast-in tubular heating element every 2" to eliminate cold spots.
  • Generates maximum pressure with less effort.
  • Adjustable pressure.
  • UL/ULC/CE/ROHS approved.
  • Temp. range 205° - 420°F.
  • °F or °C available.
  • Space-saving clamshell design.

Benefits

  • Opens automatically.
  • Space-saving design.
  • Ideal for smaller transfers.
  • Easy to operate.
  • Digital read-outs.
  • No operator fatigue.

Operators Manual


Download the 6" x 6" Operators Manual.

Hotronix Premier Warranty

  • Lifetime Warranty on Heating Element
  • 5 yr on Framework
  • 2 yr on Circuit board
  • 1 yr Parts/labor

Questions & Answers

Everyone has questions. Tell us yours.

Q:
My heat press is older and I think it might have cold spots. How do I know?
A:
Heat press cold spots are the leading cause of application error. Use the Heat Press Test Kit to verify if your heat press is performing properly.
Q:
How can I check the pressure setting on my heat press?
A:
Lower the upper platen and lock it into place. Heat presses with a pressure readout will display the setting on the front panel.
Q:
What voltage are the Hotronix® heat presses sold in?
A:
Hotronix Heat Presses are available in both 110V or 220V.
Q:
My heat press machine starts to heat but then stops. What should I check?
A:
Verify if your machine is in the set temp or set time modes. This could be causing the heat press to stop heating.
Q:
Sometimes when I lock down my Auto Clam it releases too soon. Any suggestions?
A:
If you can't get your heat press to stay closed, there may be too much pressure or the round magnet on the adjustment arm may need cleaning. Check with your manufacturer.
Q:
Is it important to use the correct pressure when applying designs to garments?
A:
The key to proper application is the correct time, temperature and pressure for the material you are heat applying. If you have too much pressure it may result in strikethrough. Not enough pressure may affect the material's adhesion.
Q:
What are some of the indications that I may need a new heat press?
A:
One of the main indicators would be certain areas of the applied design are peeling or not adhering fully to the substrate. When this happens it is usually from having cold spots within your heating element. A Heat Press Test Kit will identify the temperature of the four corners and center of the heat press.

You may also want to verify that you are getting even pressure throughout the platen. You can do this by placing four pieces of paper at each corner and then clamping down the upper platen. You should not be able to pull out the paper easily with the platen clamped down.
Q:
Can I use a household iron to apply Stahls' products?
A:
We do not recommend applying any of Stahls' products with a household hand iron. We suggest using a heat press with adjustable pressure settings.

Ask a question

Leave us a question and we'll post the answer shortly. If you need an immediate response, please use live chat.

1. Contact Information:

Name
Company
Email

2. Question Category:

3. Enter Question:

SUBMIT >RESET
Want to learn more?
Visit our Blog.
GO >

Review this product.

1. Contact Information:

Name
Company
Email

2. Rate this item:

3. Title for your review:

4. Write your review:

SUBMIT >RESET