Due to carrier delays, you may experience longer transit times. COVID-19 Updates
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
https://assets.stahls.com/stahls/content/images/products/premium-print-prod-image-01_small.jpg
Product Quick Look
Quick Look

Benefits:

  • Thin with soft hand
  • Semi-matte finish
  • Production friendly application

Available In:

20" 30" or 54" Wide Rolls
CAD-COLOR® Premium Print Printable Heat Transfer Vinyl

CAD-COLOR® Premium Print Printable Heat Transfer Vinyl

Best value print/cut material for creating bright & vivid designs

Order Now
Out of Stock
Premium Print is currently on back order with no estimated in-stock date. We recommend trying Express Print® for speed of production or SuperTEK® Opaque® for a soft feel.

Product not available at this time.

Details

Material Overview

This printable heat transfer vinyl is best for full color designs with ultra-bright whites, making it perfect for decorating cotton and polyester apparel and accessories. It’s thin and lightweight, adding a premium look and soft feel to any item it's applied to.
  • Thin with a soft hand when applied
  • Semi-matte finish
  • Production friendly application
  • For light or dark-colored fabrics
  • Available in 3 roll widths to fit most print/cut machines
  • For solvent inks using a print/cut system only—not compatible with inkjet/laser printer
  • Recommended mask: Medium Tack Magic Mask®
  • Part of our $5 Flat Rate Ground Shipping Program

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 85 microns (.085 mm)
  • Stretch & Rebound: Good
  • Color Fastness: 4-5
  • Washability: 50
  • Dry Time: 2-4 hours
  • Safety: CPSIA Certified
User Guide

CAD-COLOR® Premium Print Printable Heat Transfer Vinyl

Application Instructions

1-Color Application Instructions

Time:
15-20 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Wait 5 Seconds, Peel Warm

360 IQ Hat Press

Top Heat:
280°F
Bottom Heat:
320°F
Time:
45 seconds
Pressure:
Medium to Firm
Note: Use 1/8" foam cover pad for best application

Print/Cut Instructions

  1. Print and cut your design in positive form on the media side of the material
  2. Once dry, weed away excess material
  3. Mask the weeded design, smoothing out any air bubbles
  4. Lift the mask to expose the vinyl adhesive from the backing
  5. Position the masked design on the garment for heat application

Material/Fabric Compatibility

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter
Blade
Force
Offset
Speed
Roland GX-24
45° / 60°
70-80g
.225
50cm/s
Roland VP-300
45° / 60°
65-75g / 90g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.