Internet Explorer is no longer supported. We recommend upgrading to Chrome, Firefox, Safari, or Microsoft Edge browser.
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
Home | Adhesive Vinyl Special Effect P.S. Glitter Adhesive Vinyl
https://assets.stahls.com/stahls/content/images/products/PS-Glitter-Vinyl_Lashes_1240x900cp2_small.webp
PS-Glitter-Vinyl_Cone_1240x900cp2
Click image to view larger
PS-Glitter-Vinyl_Cone_1240x900cp2
PS-Glitter-Vinyl_Lashes_1240x900cp2
PS-Glitter-Vinyl_GritFitness_1240x900cp
PS-Glitter-Vinyl_MerryBrightBulb_1240x900cp2
video|vimeo|682958259|https://i.vimeocdn.com/video/1384562801-2912421204bc4a265f6a1bc1ecf94a21e46e60317b18158c91244d41d2ca7d2d-d_295x166

CAD-CUT® P.S. Glitter Adhesive Vinyl

Create Dazzling Hard Goods

More Details
Use your vinyl cutter to create sparkling decals with P.S. Glitter. This easy-to-use, calendared pressure-sensitive vinyl features a smooth glitter finish and brilliant shine. Available in 17 vibrant colors, this material is soft, pliable, and safe for indoor or outdoor use. Apply to almost any hard surface, including tumblers, mugs, signs, and more.
Note: This media is not for digital printing.
Download P.S. Glitter At-A-Glance
  • Easy to cut and apply
  • Recommended for general purpose permanent application: signs, banners, window graphics, tumblers, and most hard goods
  • For indoor/outdoor use: Up to 5 years outdoor life
  • Not recommended for use with microwave or dishwasher or near heat/flame source
  • Squeegee and ORATAPE Patterns mask recommended for application
  • 76.2 micron thickness
  • Not laser cutter compatible
Order Now

Open this ordering wizard full window

Details

Overview

Use your vinyl cutter to create sparkling decals with P.S. Glitter. This easy-to-use, calendared pressure-sensitive vinyl features a smooth glitter finish and brilliant shine. Available in 17 vibrant colors, this material is soft, pliable, and safe for indoor or outdoor use. Apply to almost any hard surface, including tumblers, mugs, signs, and more.
Note: This media is not for digital printing.
Download P.S. Glitter At-A-Glance

Details

  • Easy to cut and apply
  • Recommended for general purpose permanent application: signs, banners, window graphics, tumblers, and most hard goods
  • For indoor/outdoor use: Up to 5 years outdoor life
  • Not recommended for use with microwave or dishwasher or near heat/flame source
  • Squeegee and ORATAPE Patterns mask recommended for application
  • 76.2 micron thickness
  • Not laser cutter compatible
User Guide

CAD-CUT® Permanent P.S. Sign Vinyl

Application Instructions

Step 1: Place vinyl with the liner side down into cutter and cut your design.
(DO NOT reverse/mirror your design.) Weed away excess vinyl.
Step 2: Mask your design using ORATAPE mask, making sure to smooth out any bubbles with a plastic squeegee.
Step 3: Remove masked graphic from liner and stick to center of application surface. Using firm and even pressure, squeegee the graphic from the center outward, past the edges of the design.
Step 4: Starting in a corner, peel back the ORATAPE at a 180° angle while pressing the tape against the graphic with your hand.
Step 5: Feel for any edges, bubbles, creases, or parts of the graphic that are not flat. Press down firmly with your hand and work out the problem area until the graphic is completely smooth.

Cutter Instructions

Cutter
Blade
Force
Offset
Speed
Graphtec
45°
6 - 8
1
25 cm/s
Roland GS-24
45°
90 - 110
0.250
30 cm/s
Silhouette Cameo
Autoblade
4
N/A
8
Cricut Maker 5
Fine-Point
Glitter Vinyl
N/A
N/A
View Craft Cutter Settings
Note: Cut the design in the positive (facing up). You should always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/8" for logos.
Print Application Instructions