Quick Look
Benefits:
- Best for cheer & spirit apparel
- CPSIA certified
- Highly durable
Available In:
12" or 20" Wide Rolls
Add to favouritesfavorites
CAD-CUT® Glitter Flake™ Heat Transfer Vinyl
Create looks that sparkle and shine with this special effect material
Order Now
Details
User Guide
Videos
Open this ordering wizard full window
Click image to view larger
Material Overview
Glitter Flake™ is best known as textured glitter heat transfer vinyl used to produce vibrant designs. This unique, bling material is perfect for creating stand-out looks for fan and spirit wear, cheer uniforms, fashion garments, and more.
- Glitter finish that won't flake off or wash away
- Compatible with our Stahls' Rip-Away Appliqué™ Process
- Part of our $7.50 Flat Rate Ground Shipping Program
- Note: When Light Pink Glitter Flake is applied to dark colored fabrics, the light pink color becomes iridescent.
Also available in: 40" rolls without a carrier
Material Specifications
- Composition: Polyurethane (PU)
- Thickness: 325 microns/.325mm
- Stretch & Rebound: 3
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
Application–Heat Press
Time:
12 seconds
Temperature:
300°F/149°C
Pressure:
Medium
Peel:
Hot
Application–Home Iron
- Set iron dial between Cotton & Linen
- Place on flat, hard surface
- Cover design with cover sheet or other multi-purpose paper
- Press down on iron with medium pressure (do not slide iron)
- Press each section of the design for 15-20 seconds
- If areas of design lift after application, replace cover sheet & re-press for 10 seconds
- Peel carrier cold
Application to Natural Fibers
Time:
10-12 seconds
Temperature:
302°F/150°C
Pressure:
Medium
Peel:
Hot
Application to Synthetic Fibers
Time:
10-12 seconds
Temperature:
290°F/143°C
Pressure:
Medium
Peel:
Hot
Heated Lower Platen Application to 100% Polyester
Lower Platen:
320°F
Upper Platen:
270°F
Time:
10 seconds
Pressure:
60 psi (#6/Medium on Hotronix® machines)
Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen:
290°
Upper Platen:
270°
Time:
30 secs
Pressure:
60 psi (#6/Medium on Hotronix®)
Material/Fabric Compatibility
Special Notes
When Light Pink Glitter Flake is applied to dark colored fabrics, the light pink color becomes iridescent.
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Craft Cutter Instructions
Cricut
Blade:
Standard
Setting:
Iron-ON+
Silhouette
Material Type:
HTV-Flocked
Blade:
4
Speed:
4
Force:
18
Brother
Blade:
3
Speed:
3
Pressure
6
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Note
The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
Material Combination Instructions
Foreground material:
Background material:
Cutter Guidelines
Cutter
Blade
Force
Offset
Speed
GCC
45°/60°
200-210g/160-200g
.25 / .50
25 - 50cm/s
Graphtec
45°
18-22
0
30
Roland GS-24
45°
190-210g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
How to Heat Press CAD-CUT® Glitter Flake™
Uploaded on Jul 28, 2021
Learn the step-by-step instructions of how to properly heat press CAD-CUT® Glitter Flake™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure.
Top 3 Reasons to Buy: CAD-CUT® Glitter Flake™
Uploaded on Apr 16, 2021
Learn about one of the best special effect and texture heat transfer vinyl on the market in CAD-CUT® Glitter Flake™. This unique, bling heat transfer material is perfect for creating stand-out looks that reach across a variety of markets. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business.
How to Get This Look: 3-Color Glitter Flake™ Design
Uploaded on Feb 25, 2019
In this series, learn how to "Get This Look." From start to finish learn how to heat press three colors of CAD-CUT® Glitter Flake™ that will warm any heart. Plus, add personalization to make it even more special. All you need is a vinyl cutter and a heat press!