Internet Explorer is no longer supported. We recommend upgrading to Chrome, Firefox, Safari, or Microsoft Edge browser.
https://assets.stahls.com/stahls/content/images/products/glitter-flake-prod-image-05_small.webp
Product Quick Look
Quick Look

Benefits:

  • Best for cheer & spirit apparel
  • CPSIA certified
  • Highly durable

Available In:

12" or 20" Wide Rolls
CAD-CUT® Glitter Flake™ Heat Transfer Vinyl

CAD-CUT® Glitter Flake™ Heat Transfer Vinyl

Create looks that sparkle and shine with this special effect material

Helpful Links

Order Samples

Shop All CAD-CUT®

Let Us Cut it For You

Order Now

Open this ordering wizard full window

Limited Edition Colors Now 30% Off!
Discount applies to standard pricing only.
Details
glitter-flake-prod-image-06
glitter-flake-prod-image-01
glitter-flake-prod-image-02
glitter-flake-prod-image-08
glitter-flake-prod-image-07
glitter-flake-prod-image-06

    Material Overview

    Glitter Flake™ is best known as textured glitter heat transfer vinyl used to produce vibrant designs. This unique, bling material is perfect for creating stand-out looks for fan and spirit wear, cheer uniforms, fashion garments, and more.
    Also available in: 40" rolls without a carrier

    Material Specifications

    • Composition: Polyurethane (PU)
    • Thickness: 325 microns/.325mm
    • Stretch & Rebound: 3
    • Washability: 50
    • Safety: CPSIA Certified
    • Laser cutter compatible
    Download Glitter Flake At-A-Glance
    View Pantone Color Chart
    User Guide

    CAD-CUT® Glitter Flake™ Heat Transfer Vinyl

    Application Instructions

    Application–Heat Press

    Time:
    12 seconds
    Temperature:
    300°F/149°C
    Pressure:
    Medium
    Peel:
    Hot

    Application–Home Iron

    1. Set iron dial between Cotton & Linen
    2. Place on flat, hard surface
    3. Cover design with cover sheet or other multi-purpose paper
    4. Press down on iron with medium pressure (do not slide iron)
    5. Press each section of the design for 15-20 seconds
    6. If areas of design lift after application, replace cover sheet & re-press for 10 seconds
    7. Peel carrier cold

    Application to Natural Fibers

    Time:
    10-12 seconds
    Temperature:
    302°F/150°C
    Pressure:
    Medium
    Peel:
    Hot

    Application to Synthetic Fibers

    Time:
    10-12 seconds
    Temperature:
    290°F/143°C
    Pressure:
    Medium
    Peel:
    Hot

    Heated Lower Platen Application to 100% Polyester

    Lower Platen:
    320°F
    Upper Platen:
    270°F
    Time:
    10 seconds
    Pressure:
    60 psi (#6/Medium on Hotronix® machines)

    Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends

    Lower Platen:
    290°
    Upper Platen:
    270°
    Time:
    30 secs
    Pressure:
    60 psi (#6/Medium on Hotronix®)

    Material/Fabric Compatibility

    Special Notes

    When Light Pink Glitter Flake is applied to dark colored fabrics, the light pink color becomes iridescent.

    Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.

    Craft Cutter Instructions

    Cricut
    Blade:
    Standard
    Setting:
    Iron-ON+
    Silhouette
    Material Type:
    HTV-Flocked
    Blade:
    4
    Speed:
    4
    Force:
    18
    Brother
    Blade:
    3
    Speed:
    3
    Pressure
    6

    Care Instructions

    Machine wash inside-out using mild detergent.
    Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

    Storage

    Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

    Note

    The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.

    Material Combination Instructions

    Foreground material:
    Background material:

    Cutter Guidelines

    Cutter
    Blade
    Force
    Offset
    Speed
    GCC
    45°/60°
    200-210g/160-200g
    .25 / .50
    25 - 50cm/s
    Graphtec
    45°
    18-22
    0
    30
    Roland GS-24
    45°
    190-210g
    .25
    30cm/s
    View Craft Cutter Settings
    Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
    Print Application Instructions
    Videos

    How to Heat Press CAD-CUT® Glitter Flake™

    2021-07-28T20:00:07Z

    Learn the step-by-step instructions of how to properly heat press CAD-CUT® Glitter Flake™ to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this CAD-CUT® product and the proper time, temperature, and pressure. To order CAD-CUT® Glitter Flake™ today simply click the link here https://bit.ly/3tZ1fSf

    Top 3 Reasons to Buy: CAD-CUT® Glitter Flake™

    2021-04-16T17:15:00Z

    Learn about one of the best special effect and texture heat transfer vinyl on the market in CAD-CUT® Glitter Flake™. This unique, bling heat transfer material is perfect for creating stand-out looks that reach across a variety of markets. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-CUT® Glitter Flake™ today simply click the link here https://bit.ly/3t7zNBU

    How to Get This Look: 3-Color Glitter Flake™ Design

    2019-02-25T17:38:22Z

    In this series, learn how to "Get This Look." From start to finish learn how to heat press three colors of CAD-CUT® Glitter Flake™ that will warm any heart. Plus, add personalization to make it even more special. All you need is a vinyl cutter and a heat press! Connect with us: https://blog.stahls.com/ -~-~~-~~~-~~-~- Liked this video? Then please watch: "5 Cool Ways to Use Heat Transfer Foil & Adhesive" https://www.youtube.com/watch?v=8p1Ze7wQ5dY -~-~~-~~~-~~-~-