Internet Explorer is no longer supported. We recommend upgrading to Chrome, Firefox, Safari, or Microsoft Edge browser.
This website uses cookies.
By continuing to browse, you accept our use of cookies as explained in our Privacy Policy.
https://assets.stahls.com/stahls/content/images/products/CClr-TEK-Gloss1_small.webp
Product Quick Look
Quick Look

Benefits:

  • Lightweight and stretchable
  • Gloss finish
  • Low temp application

Available In:

20" Wide Rolls
CAD-COLOR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl

CAD-COLOR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl

Create a High-Gloss Finish

Order Now

Open this ordering wizard full window

Details

Material Overview

With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
  • Lightweight, stretchable, incredibly soft hand
  • Gloss finish
  • Low application temperature - safe for sensitive materials
  • Apply over a material for tone-on-tone "liquid glass" look
  • For white or light fabrics only
  • Mask is not needed
  • For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
  • Compatible with our Stahls' Rip-Away Appliqué™ Process
  • $7.50 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Tip: Protect heat-sensitive garments from imprints and scorching with a Silicone Upper Platen Cover.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 50 microns (.05 mm)
  • Stretch & Rebound: 5
  • Washability: 50
  • Color Fastness: 4-5
  • Dry Time: 30-60 minutes
  • Safety: CPSIA Certified
User Guide

CAD-COLOR® SuperTEK® Gloss Clear Printable Heat Transfer Vinyl

Application Instructions

Application Instructions

Time:
Tack for 5 seconds, peel cold, cover and seal 5 seconds.
Temperature:
280-300°F/ 138-150°C
Pressure:
Medium (#6 on Hotronix)

Heated Lower Platen Application

Upper:
250°F
Lower:
320°F
Time:
12-15 seconds (depending on thickness of garment)
Pressure:
Medium

Print/Cut Instructions

  1. Print and cut your design in mirrored form on the adhesive side of the roll
  2. Once dry, weed away excess material
  3. Position the weeded design in positive form on the garment for heat application

Material/Fabric Compatibility

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter
Blade
Force
Offset
Speed
Roland GX-24
45°
70-90g
.25
30cm/s
Roland VP-300
45°
70-90g
.25
30cm/s
Roland SP-300
45°
70-90g
.25
30cm/s
Roland XC-540
45°
70-90g
.25
30cm/s
Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Videos

How to Heat Press: CAD-COLOR® SuperTEK® Gloss Clear

2021-08-18T20:00:00Z

Learn the step-by-step instructions of how to properly heat press CAD-COLOR® SuperTEK® Gloss Clear to blank apparel. Watch as Josh Ellsworth walks you through how you can get a perfect application when using this special custom logo product and the proper time, temperature, and pressure. To order CAD-COLOR® SuperTEK® Gloss Clear today simply click the link here https://bit.ly/3xgLk3n

Top 3 Reasons to Buy: CAD-COLOR® SuperTEK® Clear Gloss

2021-07-16T18:00:01Z

Learn about one of the best full color heat transfer materials on the market in CAD-COLOR® SuperTEK® Clear Gloss. This eye-catching heat transfer material offers you the ability to get exceptional stretch and rebound properties. This lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Watch as Josh highlights the top 3 reasons why you should consider this product and how it can best be used for your business. To order CAD-COLOR® SuperTEK® Clear Gloss today simply click the link here