CAD-COLOR® Solutions® Opaque Printable Heat Transfer Vinyl

Quality transfers on a variety of dark fabrics.

  • Excellent opacity for application to dark substrates
  • Patented STX² adhesive applies to almost anything
  • Exceptional stretch and rebound
  • Won't crack or peel
  • Semi-matte finish
  • Recommended fabrics: preshrunk cotton, polyester, Lycra®/spandex, nylon, Cordura®, leather
  • Recommended mask: Solutions® Mask
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 55 microns (.055 mm)
  • Stretch & Rebound: 5
  • Washability: 50
  • Color Fastness: 5
  • Dry Time: 2-4 hours
  • Safety:CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 5 seconds, peel warm, cover and press 5 seconds.
Temperature: 305°F/152°C
Pressure: Firm
Peel: Warm

Material/Fabric Compatibility

  • 100% Pre-Shrunk Cotton
  • Polyester
  • Lycra®/spandex
  • Nylon
  • Cordura®
  • Leather
  • Neoprene

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Print Application Instructions

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland GX-24 45° 90g.225 30cm/s
Roland SP-300 45° 50g .25 30cm/s
Roland VP-300 45° 90g .25 30cm/s
Roland XC-540 45° 80g .2560cm/s
Mimaki CG-75 SPB-0001 55g .1550cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Average Customer Rating

(based on 2 reviews)
 NOT for polyester colors!!!
Reviewed by Kevin Bogle 5/18/2015 11:17:53 AM

The description is NOT accurate. This product prints and sticks well on most everything that I have tried it on. BUT, disappointed that I was told when I purchased it that it will work well wilh dark polyesters (By reading the description you would think the same thing) "Excellent opacity for application to dark substrates" "Recommended fabrics: preshrunk cotton, polyester, Lycra®/spandex, nylon, Cordura®, leather" It allows the dye in the polyester materials to bleed in to the white. Very poor for Polyester shirts.

 Great results on every job so far
Reviewed by Mike Burke 12/13/2013 6:41:33 PM

I've been useing this for sports jerseys where the design graphics were a little more complex, and the decorations were large (large numbers or logos) Printing on it is great, the print looks pro (Roland BN-20) and it cuts pretty good - beware of small intricate cuts though, as it might roll up at the corners. The graphics are long lasting and durable - after the first season, my jerseys still look vivid. I use the Solutions Mask with this process

Review this product.

1. Contact Information:


2. Rate this item:

3. Title for your review:

4. Write your review:


Most Popular Videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...