https://www.stahls.com/stahls/content/images/products/CClrFoilTEKMetGold_small.jpg

CAD-COLOR® FoilTEK™ Printable Heat Transfer Vinyl

Shimmering stretchability.

  • Lightweight, soft hand
  • Gloss finish
  • Shift colors appear differently depending on the fabric to which they're applied and the angle from which they're viewed
  • Incredible stretch and rebound
  • STiX2™ adhesive sticks to anything
  • Low application temperature - safe for sensitive materials
  • Recommended mask: Solutions® Mask
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: Silver/Gold Shift - 37 microns (.037 mm)
    Metallic Colors - 68 microns (.068 mm)
  • Stretch & Rebound: 4
  • Washability: 50
  • Color Fastness: 4-5
  • Dry Time: 30-60 minutes
  • Safety:CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: Tack for 5 seconds, peel warm, cover and seal 5 seconds.
Temperature: 280-300°F/ 138-150°C
Pressure: Medium (#6 on Hotronix)

Download Application Instructions

Material/Fabric Compatibility

  • Cotton
  • Polyester
  • Lycra®/spandex
  • Nylon
  • Cordura®
  • Leather
  • Neoprene

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
Roland® GX-24 45° 80-90g.25 30cm/s
Roland® VP-300 45° 80-90g.25 30cm/s
Roland® SP-300 45° 80-90g.25 30cm/s
Roland® XC-540 45° 80-90g.25 30cm/s
Review

Average Customer Rating

3
(based on 2 reviews)
 us all the time
Reviewed by Jonathan 3/31/2015 11:32:31 PM

make sure pressure is on 80. will cut just fine, you can't mirror this media, you cut reg, use a mask to pull off then place on material. people giving these bad reviews are people not doing it correctly getting frustrated and giving bad reviews. i had trouble figuring out at first but now its easy. lets rock and roll


 If I could give this zero stars I would!
Reviewed by Ashley O'Neal-Shue 3/30/2015 12:21:19 AM

I took a chance on buying this. First I asked them whether or not a laser printer would work with this product and I was given the response that I would need to use exactprint paper with it. This was not right information whatsoever. I receive it and see that I needed the solutions mask as well. I ordered three colors, metallic silver, metallic gold, and metallic white. I was able to successfully print on this paper BUT the mask solutions rips it off! I used my cutter and it cut the vinyl just fine but this is so fine that peeling it is a nightmare! I was hoping this would make my image look really pretty and unfortunately there was no way to receive a sample of this. I bought one yard of the colors I mention PLUS the solutions mask and now I will be unable to use ANY of it. Wasted like $100. DON'T buy this unless you want to pull your hair out, total waste of money. So sad this didn't work!


Review this product.

1. Contact Information:

Name
Company
Email

2. Rate this item:

3. Title for your review:

4. Write your review:

SUBMITRESET
Overview

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...