CAD-CUT® Patterns Heat Transfer Vinyl
On trend, on demand.

Features
Express Print Application Instructions
Glitter Application Instructions
Sign Vinyl Application Instructions
- Cut vinyl in the positive, with paper side down
- Weed away excess material
- Mask your design using ORATAPE mask, making sure to smooth out any bubbles with a plastic squeegee
- Remove masked graphic from liner and stick to center of application surface
- Using firm and even pressure, squeegee the graphic from the center outward, past the edges of the design
- Starting in a corner, peel back the ORATAPE at a 180° angle while pressing the tape against the graphic with your hand
- Feel for any edges, bubbles, creases, or parts of the graphic that are not flat. Press down firmly with your hand and work out the problem area until the graphic is completely smooth.
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Print Application Instructions
Cutter Guidelines - Express Print
Cutter | Blade | Force | Offset | Speed |
GCC | 45° / 60° | 60-70g | .25 / .50 | 25 cm/s |
Graphtec | 45° | 11 | 1 | 35 cm/s |
Roland GX-24 / GS-24 | Prem. Carbide 45° | 60-70g | .25 | 25 cm/s |
Roland GX-24 / GS-24 | Prem. Carbide 60° | 60-70g | .50 | 25 cm/s |
Cutter Guidelines - Glitter
Cutter | Blade | Force | Offset | Speed |
Roland | 45° | 140 | .025 | 30 cm/s |
Graphtec | 45° | 16 | 0 | 40 |
Cutter Guidelines - ORAJET® 3164 Sign Vinyl
Cutter | Blade | Force | Offset | Speed |
Roland | 45° | 70g | .350 | 24 cm/s |
Graphtec | 45° | 10 | 0 | 40 |
Average Customer Rating
(based on 8 reviews)
Reviewed by Vicki Dunning 12/19/2018 4:42:26 PM
I read the rolls are 20" wide portion. The 18" of printed surface didn't register until the product was in my hand. You can and should really make the printed area wider; 18.5" at a minimum. Yes, you need to load the media straight but totally doable. And as someone else recommended, note this is cut in the positive since it needs to be masked, not mirrored.
Reviewed by Susan Paugh 11/24/2018 2:13:43 PM
This product is so cool! It adds a whole new dimension to designs. The creative possibilities are endless!
Reviewed by Rozita Dee 4/15/2018 3:29:43 PM
I bought some pattern vinyl and would like to know force for a Roland gs-24 and heat application for the pattern vinyl. Also is the rhinestone masking the same as the masking for pattern print? Thanks, Rozita
Reviewed by Julie 3/29/2018 10:29:49 AM
This vinyl is beautiful in designs and colors. It weeds very easily and peels wonderfully. The only issues I’ve been having with it is.... I have an older heat press and none of the user guides is set up for the older presses. I had to make a lot of shirts before I got the right temps and heat times. I would not recommend this for elaborate designs, but great for simple ones. The designs are measured at 18 but are really only about 15 wide. The lengths are printed so you lose a bit in length also. Also they really should remind you in the order to cut this right side up not mirrored like the rest of the vinyl. I messed up about 20 inches before it dawned on me not to cut it mirrored. I hope this helps... :0)
Reviewed by Rosa 3/7/2018 9:06:43 PM
Love the quality and all the Graphics options
Reviewed by Angel 1/12/2018 5:47:12 PM
Could you print MY DESIGNS patterns on vinyl?
Reviewed by monique short 5/8/2017 9:42:01 PM
this vinyl has a soft feel to it, i really like it.
Reviewed by Lisa Smith 3/24/2017 10:30:11 AM
Only question is will you be adding to the designs with sports pics? Can we special order, I am so pumped about the new vinyl patterns and the way we can get them in the colors that we want..... You are amazing!!!!!
Most Popular Videos
View All Videos >-
Creating Pattern Appliqué with CAD-CUT® Patterns
It's time to get creative with appliqué to create a stand-out finish. By utilizing patterned heat transfer vinyl with embroidery, Stahls' TV educator Courtney Kubitza and embroidery expert Andrea Bommarito show decorators how to create a patterned appliqué design that decorators will love. Connect with us: Blog: https://goo.gl/VAPJ4a
-
CAD-CUT® Patterns: Heat Transfer Vinyl
Stahls' TV: http://www.stahlstv.com/ CAD-CUT® Patterns is the NEW on trend, on demand heat transfer vinyl from Stahls'. With a variety of popular colorways and the ability to choose from 49 stylish patterns to customize, it's no wonder CAD-CUT® Patterns is a favorite among apparel decorators. In this video, Stahls' TV educator Josh Ellsworth shows decorators how to order, cut, weed, and heat apply this new, fun material from start to finish!
-
Overview of Heat Printing Accessories
Learn how to use various heat printing accessories including: Flexible Application Pad, Kraft Paper, Quick Slip Lower Platen Protector, Print Perfect Pads, Heat Eraser, Layout Boards and Pre-Mask Tape
-
Close Up: Hotronix® Auto Open Clam Heat Press
The Stahls' Hotronix® Auto Open Clam Heat Press http://www.stahls.com/auto-open-clam-heat-press allows businesses to print items faster and more accurately. This "Close Up" tour of the heat press explains the differences between this machine and others in its class, bringing to light that all heat presses are not created equal. After watching you'll understand why this heat press is a wise investment for your business.
Recommended For You
Log in or register to start creating a list of Your Favorites
You already have 10 favorites.
Remove one to add this one.
Adding Favorite...
