CAD-CUT® Super Film™ Heat Transfer Vinyl

Maximum performance on synthetic fabrics.

Super Film is being discontinued. Limited quantities available up to 50% off. Discount pricing shown. All sales are final and cannot be returned.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure-Sensitive
  • Thickness: 50-90 microns (.05-.09 mm)
  • Stretch & Rebound: 4
  • Washability: 50
  • Safety: CPSIA Certified
Order Now

Open this ordering wizard full window

User Guide

CAD-CUT® Super Film™ Heat Transfer Vinyl

1-Color Application Instructions

Time: 5 seconds, peel cold, cover and re-seal 8 seconds
Temperature: 280-290°F/138-143°C
Pressure: Medium (60 psi)
Peel: Cold

2-Color Application Instructions

Background: Apply for 5 seconds, peel cold, cover and re-seal 8 seconds
Foreground: Apply foreground to background for 5 seconds, peel cold
Final Application: Cover with Kraft paper and reseal for 5 second
Temperature: 280-290°F/138-143°C
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Material Combination Instructions

Select foreground material:
Select background material:

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
GCC 45°/60° 50 - 70g.25 / .5025 - 50 cm/s
Graphtec 45° 10130
Ioline 100 60° / 45°g 40-70g / 50-100g.45 / .15 12:00
Ioline 300 45° / 30° 120-160g .85 / .90 12:00
Roland GX-24 Prem.Carbide 45° 60-80g .225/.550/35 cm/s
Roland GX-24 Prem.Carbide 60° 50-70g .5025 - 50 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...