https://assets.stahls.com/stahls/content/images/products/Fashion-FILM-heat-transfer-vinyl-cheer_small.jpg

CAD-CUT® Fashion-FILM® Heat Transfer Vinyl

The best material for T-shirts.

Ideal for application onto lightweight cotton, Fashion-FILM vinyl's thin composition and soft hand make it great for personalizing fashion apparel. Available in a wide variety of colors, including Fashion-FILM® Electric colors.

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Clear, Pressure-Sensitive
  • Thickness: 88 microns/.088mm (95 microns for Electric colors)
  • Stretch & Rebound: 3.5
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 15 seconds
Temperature: 320°F/160°C
Pressure: Medium
Peel: Hot

2-Color Application Instructions

Time: Tack background 2 seconds, peel hot, place foreground on top, 15 seconds
Temperature: 320°F/160°C
Pressure: Medium
Peel: Hot

Heated Lower Platen

Lower Platen: 3200°F
Upper Platen: 270°F
Time: 10 seconds
Pressure: 60 psi (#6/Medium on Hotronix® machines)
Peel: Hot
Note: Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat.

Application to Cotton
Pre-heat lower platen for 30 seconds.
Pre-heat garment for 10-15 seconds
Time: 25 seconds
Temperature: 320°F/160°C
Pressure: Medium
Peel: Hot
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Heated Lower Platen Instructions for 95% Polyester / 5% Spandex / Triblends
Lower Platen = 290°
Upper Platen = 270°
Time = 30 secs
Pressure = 60 psi (#6/Medium on Hotronix®)

Material Combination Instructions

Select foreground material:
Select background material:
  

Cutter Guidelines

Cutter Blade Force Offset Speed
GCC 45°/60° 80g - 90g0.2525 - 50 cm/s
Graphtec 45° 10135
Ioline 100 45° 90g .15 12:15
Ioline 300 30° 100g .15 12:15
Roland GX-24 45° 80g - 90g.25 25 - 50 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Overview

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...