https://assets.stahls.com/stahls/content/images/products/CCut-PrmPlus-Jefferson_small.jpg

CAD-CUT® Premium Plus™ Heat Transfer Vinyl

Original colors available while supplies last.

  • Applies at a low temp to prevent scorching on heat-sensitive items
  • High stretch & rebound
  • Silky matte finish
  • Available in a variety of colors, including popular university shades
  • $5 Flat Rate Ground Shipping to most areas. Certain exclusions apply.
Current colors of Premium Plus are being discontinued. Remaining original colors are available while supplies last.

A wide range of new colors is available in New high-tack or low-tack Premium Plus.
Please wait... Adding to Cart

Material Specifications

  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Pressure-Sensitive
  • Thickness: 80-108 microns/.080-108mm
  • Stretch & Rebound: 5
  • Washability: 50
  • Safety: CPSIA Certified
Order Now
User Guide

1-Color Application Instructions

Time: 8-12 Seconds
Temperature: 280-330°F/138-166°C
Pressure: Medium
Peel: Warm or Cold
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

2-Color Application Instructions

Time: Tack background 2 seconds, peel warm, place foreground on top, 8 seconds
Temp: 280-330°F/138-166°C
Pressure: Medium
Peel: Warm
Note: Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.

Heated Lower Platen

Lower Platen: 320°F
Upper Platen: 250°F
Time: 10 seconds
Pressure: Medium

Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Print Application Instructions

Material Combination Instructions

Select foreground material:
Select background material:

Cutter Guidelines

Cutter Blade ForceOffsetSpeed
GCC 45°/60° 60 - 70g.25 / .5025 cm/s
Graphtec 45° 11135
Roland GX-24 Prem. Carbide 45° 60-70g.2525 cm/s
Roland GX-24 Prem. Carbide 60° 60-70g.5025 cm/s
Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.
Review

Customer Reviews

Average Customer Rating
(based on 3 reviews)
 Love this product!
Reviewed by Joel 5/5/2019 8:13:02 AM
Owns a stahls Heat Press

The Finnish feel is so nice! :) and weeding was a walk in the park! 5 star product


 Great Vinyl
Reviewed by Arber Como 3/10/2019 10:53:16 PM
Owns a My Iron Heat Press

This thing peels and apply's great. I apply with my iron for 30sec and this thing feels great afterwards, very light and soft/ smooth. Would recomend


 Worst Vinyl ever
Reviewed by Darlene 2/11/2019 12:10:23 AM

Do not waste your money on this! The worst vinyl I have ever seen or used in my life! No matter what temp I heat pressed on it wouldn't stick! It wouldn't peel hot or cold either. Wasted a lot of time, money, and product because of this :(


Review this product.

* Required Fields
Overview

Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...