800.4.STAHLS (800.478.2457)

Today: 8:00 AM-7:00 PM EST

Roland® GX-24 Vinyl Cutter

Cut your own designs, appliqué, and lettering.

The Roland® GX-24 has a servo motor for precise cutting on heat transfer materials, pressure sensitive twill, and rhinestone stencil material.
  • Roll and sheet cutting capabilities with 22.9" cutting width maximum
  • Optical eye enables accurate alignment for contour cutting on pre-printed designs
  • Cut Studio™ Software included
  • Compatible with CadworxLIVE.com
  • Use Stahls' CutUps™ and CutUps Templates to create designs
Now just $1595 - save $200 off of regular price!

Please wait... Adding to Cart

Technical Specifications


  • Contour Cut Printed Graphics - Optical registration sensor recognizes registration marks produced by various printers
  • Cut a variety of materials, including pressure sensitive twill, with specialized blades.
  • Roll or Sheet Cutting Capabilities
  • Cut Studio™ Software included.
  • One-year warranty, with optional 1 year registered warranty extension.
The GX-24 is compatible with 98/ME/2000/XP/Vista/Windows 7/Windows 8 and with Macintosh, using Adobe Illustrator CS3, CS4, and CS5.


  • Max. Cutting Width: 22.9" (584 mm)
  • Max. Media Loading Width: 27.5" (700 mm)
  • Max. Media Thickness: .012" (.3 mm)
  • Number of Pinch Rollers: 2
  • Drive Motor: DC Servo Control
  • Max. Cutting Force: 250g
  • Max. Cutting Speed: 20 ips (500 mm/s)
  • Software Resolution: .00098"
  • Repeatability: +/- .1 mm
  • Memory: 800 kb
  • Interface: USB
  • Power Supply: AC 100-240V, 50~60 Hz
  • Operational Environment:
    Temp 5° - 40°C / 41° - 104°F
    Humidity 35%-80%
  • Dimensions (HxWxD): 9.25 x 33.5 x 12.2"
  • Net Weight: 35 lbs

Questions & Answers

Everyone has questions. Tell us yours.

Why must I change my cutter settings when I put in a new color of material?
Although the product may remain the same, the composition may vary from color to color, making some thicker or thinner than others. We suggest doing a test cut each time a new roll is put into your cutter.
How do I cut backgrounds on my vinyl cutter?
Creating a background layer will involve using a contour tool within a graphic art program. In CorelDRAW®, for example, use the Interactive Contour Tool to create additional layers to the outside of the original object. Keep in mind, when cutting a background layer you will need to perform test cuts and adjust the cutting specifications the same way you would cut a foreground layer.
Why are designs not cutting smoothly and leaving ragged edges?
First, check that your blade does not need to be replaced, then verify that you are using the proper cutting guidelines for the material you are cutting. If this doesn't solve the problem, it could be the amount of nodes in the design. To reduce the number of nodes in a design you will need to use your graphics program's node edit tool.
What caused my material to bunch while cutting?
On a vinyl cutter, be sure the pinch rollers are locked down, securing the edges of your material to allow for continuous feed.
My cutter won’t cut after the job was sent from my computer. What could be the problem?
Check to see that your cables are securely connected from the computer to the cutter. If that doesn't work, consult your owner's manual.

Ask a question

Leave us a question and we'll post the answer shortly. If you need an immediate response, please use live chat.

1. Contact Information:


2. Question Category:

3. Enter Question:

Want to learn more?
Visit our Blog.
GO >

Review this product.

1. Contact Information:


2. Rate this item:

3. Title for your review:

4. Write your review:


Educational videos

View All Videos >

Log in or register to start creating a list of Your Favorites

You already have 10 favorites.
Remove one to add this one.

Adding Favorite...